Wood's Powr-Grip MTA8LP6F Mobile Battery-Powered Stone Lifter with Tilt｜ Other Products

Wood's Powr-Grip MTA8LP6F Quadra-Tilt 360 Vacuum Lifter Mechanically Assisted Tilt for Medium-Duty Stone Handling
The Wood's Powr-Grip MTA8LP6F is a professional-grade vacuum lifter engineered for medium-duty stone handling applications requiring frequent transitions between horizontal and vertical load orientations. With a 360 lb (165 kg) load capacity and a Quadra-Tilt four-bar linkage system, it is purpose-built for contractors and fabricators moving granite countertops, large-format tile, glass panels, and similar flat materials. The lifter is available in AC-powered (120v or 240v) and air (venturi) configurations, and in both wide and narrow pad spread configurations to accommodate varying jobsite requirements. It is sold exclusively through authorized dealers and is designed to ASME B30.20 (BTH-1 Design Category "B", Service Class "0") standards.
Unlike standard vacuum lifters that require manual repositioning or brute-force tilting, the MTA8LP6F uses a Quadra-Tilt four-bar linkage that makes tilting mechanically assisted, reducing operator fatigue and improving control during the critical transition between flat and upright positions. The sliding adjustable pad mounts allow tool-free repositioning to accommodate different load dimensions, and the spring-mounted pads automatically conform to slightly uneven load surfaces for a consistent seal.
Key Features & Benefits
Quadra-Tilt Four-Bar Linkage
The Quadra-Tilt linkage mechanically assists the 90° tilt between upright and flat positions, significantly reducing the physical effort required when transitioning large, heavy stone slabs. The system also automatically holds the load in both the upright and flat positions once correctly attached, freeing the operator to focus on precise placement rather than fighting the weight of the material.
Sliding Adjustable Pad Mounts
Pad mounts slide to infinitely variable positions along the pad frame without tools, allowing the lifter to accommodate a wide range of load sizes quickly between lifts. The standard pad spread ranges from a minimum of 38" x 18-1/4" (96 cm x 46 cm) to a maximum of 100-3/4" x 29" (256 cm x 74 cm), covering the majority of countertop and slab dimensions encountered in the field.
Spring-Mounted Vacuum Pads
Each of the eight 6" (15 cm) diameter vacuum pads is spring-mounted to automatically adjust to minor variations in the angle of the load surface, ensuring consistent pad-to-surface contact even on slightly bowed or textured materials. This reduces the risk of partial seal failures that can compromise lift safety.
Blow-Off Release System
The blow-off release reverses airflow through the pads to instantly break the vacuum and release the load cleanly, eliminating the after-stick that can cause sudden load shifts during placement. Attach and release times are approximately 2 seconds each, keeping workflow efficient on the job.
Vacuum Gauge with Green/Red Zones
The vacuum gauge provides a clear, at-a-glance indication of whether vacuum levels are sufficient for lifting, with green and red zones eliminating guesswork. Operators can monitor seal integrity throughout the lift, and the optional Vacuum Loss Warning Buzzer (93780AM) adds an audible alarm for additional safety in noisy environments.
Multiple Control Handles
Multiple handle positions give operators the flexibility to choose ergonomic grip locations suited to their specific task and body position, reducing strain during extended use. The twist-lock electric plug (AC models) ensures the power connection cannot be accidentally pulled free during operation.
Common Applications
Granite and Quartz Countertop Installation
Lift and tilt fabricated stone countertop slabs from a flat transport or storage position to vertical for installation, minimizing manual handling risk on heavy slabs up to 360 lbs.
Large-Format Stone Slab Handling
Move full-size natural or engineered stone slabs in fabrication shops or on jobsites, with pad spread adjustability accommodating a wide range of slab dimensions without reconfiguring hardware.
Glass Panel Positioning
Handle large glass panels that require careful transition from horizontal to vertical, where the Quadra-Tilt linkage provides controlled, stable tilting motion to prevent breakage.
Porcelain and Ceramic Tile Setting
Position oversized porcelain or ceramic tiles during installation where manual handling is impractical, using the adjustable pad mounts to center vacuum coverage on varying tile formats.
Stone Countertop Fabrication Shop Use
Integrate the lifter into a fabrication workflow to safely move slabs between cutting, polishing, and staging areas, reducing worker injury risk and improving throughput.
Window and Panel Installation
With the optional 2" (5 cm) pad spacers (97461), the lifter can handle windows with mullions or other loads with surface obstructions, expanding its utility beyond standard flat-surface applications.
Compatible Materials

Granite slabs and countertops
Quartz and engineered stone surfaces
Marble and natural stone panels
Large-format porcelain and ceramic tile
Glass panels and windows
Smooth concrete panels
Solid surface and composite stone materials
Other flat, non-porous or low-porosity smooth-surface materials suitable for vacuum attachment

Product Documents

Instructions — MTA8LP6FAC (AC Model)
Specifications Sheet — MTA8LP6FAC
Troubleshooting / Leak Test Procedure
Instructions — MTA8LP6FAIR (Air/Venturi Model)
Instructions — Vacuum Loss Warning Buzzer (Option 93780AM)
Specifications — Vacuum Loss Warning Buzzer (Option 93780AM)

Application Instructions
Before Using the Lifter

Read all instructions and warnings before operating the lifter.
Perform the every-lift inspection: check vacuum pads for damage or contamination, inspect hoses and fittings for wear, verify the tilt linkage moves freely, and confirm the vacuum gauge reads correctly.
Ensure the power source matches the lifter's rated voltage (120v or 240v AC as applicable) and that the twist-lock plug is fully engaged.
Verify the load surface is clean, smooth, and free of holes, cracks, or excessive porosity that would prevent a proper vacuum seal.

Applying the Pads to a Load

Adjust the sliding pad mounts to match the dimensions of the load, positioning them for balanced coverage. No tools are required.
Activate the power system to generate vacuum flow.
Position the lifter on the load surface, ensuring all pads make full contact with the material.
Monitor the vacuum gauge — the indicator must be in the green zone before attempting any lift. On optimal surfaces, full vacuum is achieved in approximately 2 seconds.
On porous or less-than-optimal surfaces, allow additional time and verify the gauge remains stable in the green zone.

Lifting and Moving the Load

Confirm the vacuum gauge is in the green zone immediately before lifting.
Use the control handles in the most ergonomic position for your stance and task.
Lift and move the load smoothly, monitoring the vacuum gauge continuously throughout the operation.
In case of power failure, the vacuum system is designed to retain sufficient vacuum to hold the load; lower the load to a safe surface immediately and investigate the cause before resuming work.

Tilting the Load

Confirm the vacuum gauge remains in the green zone before initiating any tilt.
Use the Quadra-Tilt linkage to assist the 90° rotation of the load between the flat (horizontal) and upright (vertical) positions.
The tilt mechanism will automatically hold the load in both the fully upright and fully flat positions once reached — do not release the load until it is confirmed stable and fully supported.

Releasing the Load

Lower the load fully onto a stable, supported surface before releasing.
Activate the blow-off release to reverse airflow through the pads, breaking the vacuum seal instantly and cleanly.
Confirm all pads have released before moving the lifter away from the load.

After Use and Storage

Power down the lifter and disconnect from the power source.
Clean vacuum pads and inspect for damage before storage.
Store the lifter in a clean, dry location protected from physical damage.
Record any observed defects and service the lifter before next use if any are found.

Technical Specifications

Specification
Details

Model Number
MTA8LP6FAC (AC) / MTA8LP6FAIR (Air/Venturi)

Maximum Load Capacity
360 lbs (165 kg)

Load Movement
Assisted manual tilt, 90° between upright and flat

Standard Operating Power (AC)
120 volts AC, 60 Hz, 6 amps; 240 volts AC, 60 Hz, 3 amps also available

Power Options
AC (120v or 240v) / Air (Venturi) / DC Battery (see variants)

Pad Spread — Minimum
38" x 18-1/4" (96 cm x 46 cm)

Pad Spread — Maximum
100-3/4" x 29" (256 cm x 74 cm)

Pad Spread Configurations
Wide and Narrow

Number of Vacuum Pads
8

Vacuum Pad Size
6" (15 cm) diameter

Attach / Release Time
Approximately 2 seconds / 2 seconds

Lifter Weight
125 lbs (57 kg)

Tilt System
Quadra-Tilt four-bar linkage — mechanically assisted

Pad Mount Adjustment
Sliding, infinitely variable, tool-free

Design Standard
ASME B30.20 (BTH-1 Design Category "B", Service Class "0")

Application
Medium-duty stone and flat material handling

Stock# (Wide Pad, 120v AC)
97450AM

Stock# (Narrow Pad, 120v AC)
97450

Stock# (Wide Pad, 240v AC)
97452AM

Stock# (Narrow Pad, 240v AC)
97452

Stock# (Wide Pad, Air/Venturi)
97451AM

Stock# (Narrow Pad, Air/Venturi)
97451

Manufacturer
Wood's Powr-Grip Co., Inc. — Laurel, MT USA

Distribution
Sold through Authorized Dealers only

Frequently Asked Questions
Q: What is the difference between the wide pad spread and narrow pad spread configurations?A: Wide and narrow pad spread configurations determine the default spacing between pad mount positions on the frame, allowing the lifter to better match the width of the material being handled. Both configurations use the same sliding adjustable pad mounts for fine-tuning within their respective range.
Q: Can this lifter be used with compressed air instead of AC power?A: Yes. The MTA8LP6FAIR variant uses an air (venturi) power system compatible with compressed air supplies commonly available in production facilities and fabrication shops. Note that specifications for the air model may differ from the AC version; contact a Technical Sales Representative for details.
Q: Is the MTA8LP6F suitable for porous stone surfaces such as certain natural stones?A: Performance on porous or textured surfaces depends on the degree of porosity. On optimal smooth surfaces, vacuum is achieved in approximately 2 seconds. On less ideal surfaces, vacuum level may be reduced — always confirm the gauge is in the green zone before lifting, and consult the product instructions or contact Wood's Powr-Grip for guidance on specific materials.
Q: What optional accessories are available for this lifter?A: Available options include: Individual Pad Shutoffs (93011) for handling varied load sizes and shapes; Vacuum Loss Warning Buzzer (93780AM) for audible low-vacuum alerts; 2" (5 cm) Pad Spacers (97461) for loads with surface obstructions such as window mullions; voltage adaptation for non-standard AC voltages; and alternative pad frame dimensions and configurations for specialized load geometries.
Q: What should I do if the vacuum gauge drops into the red zone during a lift?A: Lower the load to a safe, supported surface immediately. Do not continue the lift with insufficient vacuum. Inspect all pads for damage, contamination, or improper contact with the load surface. Perform a leak test per the troubleshooting documentation before resuming operations.
Q: Does this lifter comply with industry safety standards?A: Yes. The MTA8LP6F is designed to ASME B30.20 standards (BTH-1 Design Category "B", Service Class "0"), which are industry standards established by the American Society of Mechanical Engineers (ASME) and published by the American National Standards Institute (ANSI).
Brand:Wood's Powr-GripSKU:97451AMTags:Battery Powered Sheet Lifter, Call for Pricing, Recommendations disabled, Tilters, Vacuum LiftersMTA MEDIUM DUTY LIFTER SERIES:Wide pad spread 360 lbs [165 kg] (AC) 120v power system., Narrow pad spread 360 lbs [165 kg] (AC) 120v power system, Wide pad spread 360 lbs [165 kg] (AC) 240v power system., Narrow pad spread 360 lbs [165 kg] (AC) 240v power system, Wide pad spread 360 lbs [165 kg] (Air), Narrow pad spread 360 lbs [165 kg] (Air)